Wall
components are posts, panels and caps for wall.
Installation requires minimal equipment. Small
installations can be done with only hand tool. For
larger installations only a Bobcat with auger and fork
attachments is sufficient. Walls over 6-foot height
require a lift to slide panels and install
caps. Experienced installers use a platform on the Bobcat
fork to slide panels and install caps on 7-foot and
8-foot walls.
Non-standard
changes in wall line can be accomplished by beveling the
post slot with a diamond saw. Detail guidelines are
available from Stonehenge West for new installers or
owner installation.
Posts
and bottom panels in place ready for
concrete
Post
foundations are minimum 24 inches deep and
12 inches diameter for 6-foot height
wall. Greater bury depth and/or larger
diameter post hole may be needed for higher
walls, soft, sandy or
moist soils, high wind exposure areas and
ground sloping away from line of wall.
